ヨタの日々

_ [NetBSD][Raspberry Pi 3]NetBSD/Raspberry Pi 3

ネットワークは WiFi はまだ対応中のようなので有線接続する。/etc/rc.conf や /etc/resolv.conf など編集したファイルは SD に保存されるで心置きなく編集する。

SD なので容量は厳しい。

% df -h
Filesystem         Size       Used      Avail %Cap Mounted on
/dev/ld0a          7.0G       2.0G       4.7G  29% /
/dev/ld0e           92M        17M        75M  18% /boot
kernfs             1.0K       1.0K         0B 100% /kern
ptyfs              1.0K       1.0K         0B 100% /dev/pts
procfs             8.0K       8.0K         0B 100% /proc

dmesg

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 8.99.3 (RPI2) #0: Sun Oct  1 10:45:49 UTC 2017
	mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/evbarm/compile/RPI2
total memory = 944 MB
avail memory = 924 MB
sysctl_createv: sysctl_create(machine_arch) returned 17
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
cpu0 at mainbus0 core 0: 600 MHz Cortex-A53 r0p4 (Cortex V8A core)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: 32KB/64B 2-way L1 VIPT Instruction cache
cpu0: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
cpu0: 512KB/64B 16-way write-through L2 PIPT Unified cache
vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
cpu1 at mainbus0 core 1
cpu2 at mainbus0 core 2
cpu3 at mainbus0 core 3
obio0 at mainbus0
bcmicu0 at obio0: Multiprocessor
armgtmr0 at obio0: ARMv7 Generic 64-bit Timer (19200 kHz)
armgtmr0: interrupting on irq 3
timecounter: Timecounter "armgtmr0" frequency 19200000 Hz quality 500
bcmmbox0 at obio0 intr 193: VC mailbox
vcmbox0 at bcmmbox0
vchiq0 at obio0 intr 194: BCM2835 VCHIQ
bcmpm0 at obio0: Power management, Reset and Watchdog controller
bcmdmac0 at obio0: DMA0 DMA2 DMA4 DMA5 DMA8 DMA9 DMA10
bcmrng0 at obio0: RNG
plcom0 at obio0 intr 185
plcom0: txfifo disabled
com0 at obio0 intr 157: BCM AUX UART, working fifo
com0: console
com0: interrupting on intr 157
genfb0 at obio0no data for est. mode 640x480x67
: switching to framebuffer console
genfb0: framebuffer at 0xfd402000, size 1920x1080, depth 32, stride 7680
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (default, vt100 emulation)
sdhost0 at obio0 intr 184: SD HOST controller
sdhost0: interrupting on intr 184
sdhc0 at obio0 intr 190: SDHC controller
sdhc0: interrupting on intr 190
dwctwo0 at obio0 intr 137: USB controller
bcmspi0 at obio0 intr 182: SPI
spi0 at bcmspi0: SPI bus
bsciic0 at obio0 intr 181: disabled
bsciic1 at obio0 intr 181: BSC1
iic0 at bsciic1: I2C bus
bcmgpio0 at obio0: GPIO [0...31]
gpio0 at bcmgpio0: 32 pins
bcmgpio1 at obio0: GPIO [32...53]
gpio1 at bcmgpio1: 22 pins
bcmcm at obio0 not configured
bcmpwm at obio0 not configured
usb0 at dwctwo0: USB revision 2.0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
cpu2: 600 MHz Cortex-A53 r0p4 (Cortex V8A core)
cpu2: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu2: 32KB/64B 2-way L1 VIPT Instruction cache
cpu2: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
cpu2: 512KB/64B 16-way write-through L2 PIPT Unified cache
vfp2 at cpu2: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
cpu1: 600 MHz Cortex-A53 r0p4 (Cortex V8A core)
cpu1: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu1: 32KB/64B 2-way L1 VIPT Instruction cache
cpu1: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
cpu1: 512KB/64B 16-way write-through L2 PIPT Unified cache
vfp1 at cpu1: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
cpu3: 600 MHz Cortex-A53 r0p4 (Cortex V8A core)
cpu3: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu3: 32KB/64B 2-way L1 VIPT Instruction cache
cpu3: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
cpu3: 512KB/64B 16-way write-through L2 PIPT Unified cache
vfp3 at cpu3: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
sdmmc0 at sdhost0
sdhc0: SDHC 3.0, rev 153, platform DMA, 250000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks
sdmmc1 at sdhc0 slot 0
uhub0 at usb0: vendor 0000 (0000) DWC2 root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
sdmmc0: SD card status: 4-bit, C10
ld0 at sdmmc0: <0x00:0x0000:ASTC:0x00:0x0000000a:0x112>
ld0: 7624 MB, 3872 cyl, 64 head, 63 sec, 512 bytes/sect x 15613952 sectors
ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz
sdmmc1: unknown tuple code 0x80, length 2
sdmmc1: unknown tuple code 0x80, length 3
sdmmc1: unknown tuple code 0x80, length 3
sdmmc1: unknown tuple code 0x80, length 7
IPsec: Initialized Security Association Processing.
(manufacturer 0x2d0, product 0xa9a6)at sdmmc1 function 1 not configured
(manufacturer 0x2d0, product 0xa9a6)at sdmmc1 function 2 not configured
uhub1 at uhub0 port 1: vendor 0424 (0x424) product 9514 (0x9514), class 9/0, rev 2.00/2.00, addr 2
uhub1: multiple transaction translators
uhub1: 5 ports with 4 removable, self powered
usmsc0 at uhub1 port 1
usmsc0: vendor 0424 (0x424) product ec00 (0xec00), rev 2.00/2.00, addr 3
usmsc0: Ethernet address b8:27:eb:f1:34:33
ukphy0 at usmsc0 phy 1: OUI 0x00800f, model 0x000c, rev. 3
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: Topre Corporation (0x853) RealForce Compact (0x200), rev 1.10/1.02, addr 4, iclass 3/1
ukbd0 at uhidev0: 8 Variable keys, 6 Array codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhub0: illegal enable change, port 1
WARNING: 5 errors while detecting hardware; check system log.
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
kern.module.path=/stand/evbarm/8.99.3/modules
vchiq: vchiq_init_state: slot_zero = 0xcacd0000, is_master = 0
vchiq: local ver 8 (min 3), remote ver 8.
vcaudio0 at vchiq0: auds
vchiq_get_state: g_state.remote->initialised != 1 (0)
vchiq: vchiq_initialise: videocore initialized after 1 retries

WARNING: no TOD clock present
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
audio0 at vcaudio0: half duplex, playback, capture, mmap, independent
vcaudio0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
wsdisplay0: screen 4 added (default, vt100 emulation)

_ [東武動物公園][グレープくん]東武動物公園のフンボルトペンギン グレープくんが亡くなった

5月に東武動物公園へ行ったとき[ 20170520#p01 ] はすでに高齢だったしのう

ただ悲しい。

グレープ君展示中止のお知らせ
グレープ君に体調の変化が見られたため、大事をとって本日より展示を中止させていただきます。また、フルルもグレープ君と一緒に移動しました。皆様にはご心配をおかけしますが、ご了承ください。#東武動物公園 #グレープ君

— 東武動物公園【公式】リュウくん (@tobuzoo7) 2017年10月11日

フンボルトペンギンのグレープ君が昨日亡くなりました。
これまで応援してくれた皆様本当にありがとうございました。また、グレープ君を最後まで見守ってくれたフルルもありがとう。そして、グレープ君長い間ありがとう。天国でゆっくり休んでね。#東武動物公園 #けものフレンズ #グレープ君 pic.twitter.com/PfjoJVyiuA

— 東武動物公園【公式】リュウくん (@tobuzoo7) 2017年10月13日

_ ご祝儀を準備しました

rebuild.fm で Hiroshima さんが「日本における謎のプロトコル」と言ってたやつです。